evenfolio

Auto · NSE: CIEINDIA

CIE Automotive India

Q3 CY26 earnings and concall highlights

Price as of 16 Nov 2026
363.45−1.34%

Q3 CY26 earnings call · Guided by management

Call held 22 Oct 2026 · Read the filing on NSEFiling

2​pressesNew presses ordered · ForgingsAlvarez · Q&A · p. 10
4,000​square metersNew plant area · GearsAlvarez · Q&A · p. 10
8​%Capex as % of salesAlvarez · Q&A · p. 12
20​%Turnover drop · Bill Forge Mexico · next quartersAlvarez · Q&A · p. 5
M.Cap
₹13,788Cr
P/E
14.9×
1Y return
−15.24%
From 52W high
−30.9%

Highlights are read by AI from the company's filing and can contain mistakes. Check the source page linked to each line.

Share price

More figures from the call

Europe · Demand
3,50,000​cars per yearHybrid import quota
“So the decision on the European Commission forced by the European carmakers is that they will set up a quota limit of the imports of hybrid cars from China and the figure they have set is 350,000 per year.”
Ander Alvarez · Chief Executive Officer · Q&Ap. 9

In short

  1. 01India growth capex in CY26 to be almost double last year, with next year in a similar range.
  2. 02Capex could be about 8% of sales versus a usual 5%.
  3. 03India Q3 CY26 sales were INR18 billion, up 18% year-on-year.
  4. 04India EBITDA margin fell to 16.3% on West Asia-driven cost pressures; pass-throughs expected agreed by year end.
  5. 05Europe sales down about 10% in euros; market expected flat, margins up after restructuring.
  6. 06Delayed foundry export project began supply in mid-October after a 6-month customer-driven delay.
  7. 07No buyback planned in India; cash to go to organic growth as no suitable acquisitions found.

Capex

India: CY26 India capex to be almost double last year

Vikas Sinha · Senior Vice President · p. 4
“In CY26, the overall capex in India will be almost double of last year.”

Stampings: Stampings division plans expansion at multiple locations for its 2 main customers

Vikas Sinha · Senior Vice President · p. 4
“Our Stampings division is planning expansion at multiple locations to meet the expectation of its 2 main customers.”

Forgings: Forgings plans expansion at Pune and Hosur plants

Vikas Sinha · Senior Vice President · p. 4
“Forgings vertical is planning expansion both at its Pune and Hosur plants.”

India: Next year's capex expected in the same range as this year

Ander Alvarez · Chief Executive Officer · Q&A · p. 10
“And on top of that, for next year, we expect also to be in the same range than this year because we are thinking on additional expansions and all the verticals are growing.”

Stampings: Adding a stamping line, Kanhe building expansion; greenfield expansions considered

Ander Alvarez · Chief Executive Officer · Q&A · p. 11
“but we are also adding stamping -- one stamping line and expansion of one of the buildings in Kanhe and also thinking in further greenfield expansions.”

Capacity

Iron castings: Iron castings running close to full foundry capacity, looking to expand

Vikas Sinha · Senior Vice President · p. 4
“Iron castings is running close to full foundry capacity and looking to expand.”

Forgings: Adding presses at Chakan forging plant and planning machining plant expansion

Ander Alvarez · Chief Executive Officer · Q&A · p. 5
“That's why we are adding additional presses in our Chakan plant, and we expect to also expand our machining plant.”

Casting: Urse foundry to be fully booked after ramp-up by mid next year; new casting expansion planned

Ander Alvarez · Chief Executive Officer · Q&A · p. 5
“I mean, once the ramp-up is finished by mid of next year, we will be fully booked in our Urse plant. So we are now planning also a new expansion for our Casting division.”

Forgings: One Mexico press being moved to Hosur, India; expected to arrive Q1 2027

Ander Alvarez · Chief Executive Officer · Q&A · p. 6
“Now one of the presses is being transferred to India. So we will install this press in our facility in Hosur in the next months.”

Forgings: Assets used for lost GKN volumes transferred to India to raise output

Ander Alvarez · Chief Executive Officer · Q&A · p. 9
“The machinery, the capacity, let's say, the assets that we were using for that 20% has been transferred to India, yes.”

Order book

Gears and Composites: Gears and Composites have orders in the EV space

Vikas Sinha · Senior Vice President · p. 4
“Gears and Composites have exciting orders in the EV space.”

India: New orders in 9 months: INR9.7 billion in India, about INR3 billion in Europe

₹970​Cr
Ander Alvarez · Chief Executive Officer · Q&A · p. 5
“to-date 9 months, INR9.7 billion of new orders in all the verticals in India, and approximately INR3 billion in Europe.”

Europe: About 10-12% of this year's new orders in Europe are for EVs

Ander Alvarez · Chief Executive Officer · Q&A · p. 10
“But we are playing importantly and approximately 10%, 12% of the new orders that we have got in this year are for EVs in Europe also.”

India: Orders will be booked for all expansion plans

Vikas Sinha · Senior Vice President · Q&A · p. 11
“So Bharat sir, we will have orders booked for all of these expansion plans.”

Segments

Europe: Europe Q3 CY26 sales INR7.6 billion, 4% lower year-on-year and 15% lower sequentially

Vikas Sinha · Senior Vice President · p. 3
“Sales of INR7.6 billion in Q3 CY26 were 4% lower year-on-year versus Q3 CY26 and lower sequentially by 15% versus Q2 CY26.”

Aluminum: India sales growth held back by streamlining of aluminium vertical portfolio

Vikas Sinha · Senior Vice President · p. 4
“It could have been higher. A key reason has been the streamlining of our business portfolio at our aluminum vertical.”

Foundry: New foundry project supply started in October; impact expected next quarter

Ander Alvarez · Chief Executive Officer · Q&A · p. 5
“The order and delivery started finally mid of October. So during this month, we have already started the supply.”

Europe: European market expected flat; no growth seen unless market consolidates

Ander Alvarez · Chief Executive Officer · Q&A · p. 6
“But it's true that the European market behavior, it will be flat, and we don't see growth options unless there is a consolidation of the market that we also expect that will happen in the next year.”

Aluminum: Aluminium portfolio optimisation to continue until at least mid next year

Vikas Sinha · Senior Vice President · Q&A · p. 6
“As far as the optimization of portfolio in aluminum, yes, it will go on till at least the mid of next year because these things take time.”

Demand

India: Market growth expected to slow over next few quarters as GST cut effect fades

Vikas Sinha · Senior Vice President · p. 3
“We expect a relative slowing down in market growth over the next few quarters as the effect of GST cuts diminish.”

Europe: European auto market stagnant, with rising Chinese imports and EV penetration

Vikas Sinha · Senior Vice President · p. 3
“The European auto market is stagnant, and this is coupled with expanding numbers for Chinese imports, along with increasing penetration of electric vehicles.”

India: All India market segments expected to have good growth prospects in medium term

Vikas Sinha · Senior Vice President · p. 4
“In the medium term, we do expect all the market segments in India to have good growth prospects despite the continuing geopolitical tensions.”

India: India market seen remaining good, except maybe tractors

Vikas Sinha · Senior Vice President · Q&A · p. 7
“The market situation is good in India, I would say. Of course, the last few quarters have been tremendously good, but it will remain a good situation, except maybe for tractors.”

Europe: EV share rising in Europe partly due to high oil prices from Iran war

Ander Alvarez · Chief Executive Officer · Q&A · p. 10
“I mean, because of also one of the drivers of the EV market share increase has been the huge oil price increase due to the Iran war.”

Margins and costs

India: India EBITDA margin 16.3% in Q3 CY26 vs 17.3% a year earlier and 16.7% in Q2

Vikas Sinha · Senior Vice President · p. 3
“The India operations achieved an EBITDA margin of 16.3%, the way we calculate, in Q3 CY26 versus 17.3% in Q3 CY25 and 16.7% in Q2 CY26.”

India: India margin drop due to West Asia conflict raising raw material, energy, consumable costs

Vikas Sinha · Senior Vice President · p. 3
“The margin drop is due to price pressures generated by the conflict in West Asia, mainly in raw material, energy and consumables.”

Europe: Europe EBITDA margin 16.3% vs 14.1% a year earlier, attributed to last year's restructuring

Vikas Sinha · Senior Vice President · p. 4
“The EBITDA margin in our European operations in Q3 CY26 was 16.3% versus 14.1% in Q3 CY25 and 15.9% in Q2 CY26. Margin recovery is because of last year's restructuring activities.”

India: India 9M CY26 EBITDA margin 16.9% vs 17.8% in 9M CY25

Vikas Sinha · Senior Vice President · p. 4
“The EBITDA margin of our Indian operations in 9 months CY26 results was 16.9% versus 17.8% in 9 months CY25.”

Europe: Europe 9M CY26 EBITDA margin 16.0% vs 13.4%, credited to prior-year restructuring

Vikas Sinha · Senior Vice President · p. 4
“There was a healthy increase in EBITDA margin to 16.0% in 9 months CY26 results versus 13.4% in 9 months CY25, thanks to restructuring actions taken in the previous year.”

Acquisitions and new business

Aluminum: Aluminium division plans to diversify into 4-wheeler HPDC parts, needing new lines

Vikas Sinha · Senior Vice President · p. 4
“The Aluminum division is planning to diversify into 4-wheeler HPDC parts, and this will require new lines.”

India: Strategy shifts to organic growth after no suitable acquisition found

Ander Alvarez · Chief Executive Officer · Q&A · p. 10
“So the strategic decision for us now is we will go for organic growth.”

Aluminum: Aluminium business merger not yet done; awaiting NCLT order

K Jayaprakash · Q&A · p. 12
“No, no, not yet. We are waiting for NCLT order.”

India: No suitable acquisition found in last 4-5 years given current valuations

Ander Alvarez · Chief Executive Officer · Q&A · p. 10
“The reality is that the current, let's say, valuation of the companies, and also in the last 4, 5 years, we have not found a proper fit for this acquisition or for this inorganic growth.”

Dividends and buybacks

India: No stock buyback planned in India; cash needed for capex plan

Ander Alvarez · Chief Executive Officer · Q&A · p. 12
“Stock -- in this moment, we are not thinking on stock repurchase in India, mainly because we have decided to go to a strong capex plan to expand our capacities and to expand our businesses in India.”

One-offs

Aluminum: Other income jump is grant income in aluminium business after final approval

K Jayaprakash · Q&A · p. 8
“That is grant income in our aluminum business. We've got the final approval. So that is recognized.”

Risks

Foundry: Foundry export project SOP delayed about 6 months by customer; supply started mid-October

Ander Alvarez · Chief Executive Officer · Q&A · p. 5
“We had a delay in the SOP of approximately 6 months, mainly due to the customer-driven delay, not our responsibility.”

Bill Forge Mexico: GKN contract renegotiated: lower volumes, longer duration

Ander Alvarez · Chief Executive Officer · Q&A · p. 5
“So the volumes has been reduced, but we extended the length of the duration of the contract.”

Europe: Electrification in Europe cut turnover by about 5% in the quarter

Ander Alvarez · Chief Executive Officer · Q&A · p. 6
“with additional electrification and the growth of the electrification in Europe is -- that is reducing our turnover approximately 5% in the quarter.”

Forgings: EV forging components bring lower turnover than crankshafts due to lower weight

Ander Alvarez · Chief Executive Officer · Q&A · p. 8
“Of course, we are entering into certain EV components in our forging divisions but the volumes and, let's say, the turnover of these components are much lower than the crankshaft value because of the weights are lower.”

Bill Forge Mexico: GKN cut volumes after American Axle acquisition, using its own idle forging capacity

Ander Alvarez · Chief Executive Officer · Q&A · p. 9
“No, the main reason is because GKN was acquired last year by American Axle and in the new strategy, they had a lot of idle forging capacity in American Axle.”

Other

India: India Q3 CY26 sales INR18 billion, up 18% year-on-year and 9% sequentially

Vikas Sinha · Senior Vice President · p. 3
“Sales in India were at INR18 billion, which were 18% higher year-on-year versus Q3 CY25 and 9% higher sequentially versus Q2 CY26.”

Consolidated Q3 CY26 sales INR25.6 billion, 11% higher year-on-year, 8% sequentially

Vikas Sinha · Senior Vice President · p. 4
“Consolidated sales were INR25.6 billion, 11% higher versus Q3 CY26 and 8% higher sequentially.”

Consolidated 9M CY26 PAT INR7.3 billion, 17% higher year-on-year

Vikas Sinha · Senior Vice President · p. 4
“The point to be noted is the consolidated PAT in 9 months CY26 is INR7.3 billion, which is 17% higher than in 9 months CY25.”

Europe: Europe PAT up 44% year-to-date despite stagnant top line

Vikas Sinha · Senior Vice President · p. 6
“But on an YTD basis, we have grown 44% on PAT in Europe.”

Europe: Moving Europe business into parent is a CIE decision; no answer given yet

Ander Alvarez · Chief Executive Officer · Q&A · p. 12
“That decision belongs to CIE. I am not now ready to give you a proper answer on that.”

Sources

Management's own statements, quoted from its NSE filings. This page was read by AI and can contain mistakes: check the source pages before relying on any figure. No forecast or opinion of ours. Not investment advice.

Search

Search funds, ETFs, stocks, pages and tools